
A Beginner’s Guide to Opening an Inground Pool for the Summer
Summer is the best time to relax and rejuvenate in the wonderful heat of the sun. In fact, recent studies indicate that the average American enjoys 75 more warm summer days per year than 25 years ago. That’s another week of tropical conditions to enjoy.
But what if you could enjoy this weather year-round? Installing an inground pool can give you endless summer enjoyment 12 months a year.
If you’re contemplating opening an inground pool, this article can help you make an informed decision. Read on for our beginner’s guide to opening an inground pool for the summer.
Start by Testing Your Inground Pool Water
It’s the pool season so go ahead and start by testing your pool water to make sure that the pH levels are balanced and that there are no algae growing in the pool. You can use a pool test kit to test the water yourself or you can take a sample of the water to a local pool supply store to have it tested for you.
Clean Your Pool and Add Fresh Water
You need to do is clean your pool. Proper pool maintenance should be observed. You can use a pool vacuum to clean the walls and floor of the pool. Then, you’ll need to add fresh water to the pool. You can use a hose to fill up the pool.
Add the Right Amount of Chemicals to Your Pool Water
Your pool will be using a lot of chemicals during the summer to keep the water clean and safe for swimming. You will need to add chlorine, algaecide, and other pool chemicals as directed by the manufacturer. Test the water regularly and adjust the chemicals as needed.
Install Your Pool Cover
Assuming you have already installed your inground pool, the process of opening it for the summer should be relatively simple. Start by ensuring that your pool cover is properly in place and secured. You will then need to remove any debris that may have accumulated on the cover.
Next, you will need to open the skimmer and return valves, as well as the drain plug. Once these have been opened, you can begin to fill your pool with water. Once the pool is full, you can add any necessary chemicals and begin to enjoy your pool!
Turn On Your Pool Filter and Pump
You’ll need to turn on your pool filter and pump. This will ensure that your water is clean and circulating properly. Next, you’ll need to check your pH levels and adjust accordingly. Once your pH levels are where they should be, you can begin adding chlorine to your pool.
Remove your pool cover and properly store it for the season. After your pool is clean and the chlorine levels are where they should be, you’re ready to enjoy your summer!
If you find yourself asking “when to close my pool“, click on the link.
Enjoy Swimming
Now that you know the basics of opening an inground pool for the summer, you’re ready to get started! Use the tips from this guide to make sure your pool is ready for swimming season. And don’t forget to enjoy your time poolside!
To discover more tips on what you should do, feel free to browse through the rest of our blogs.