How to Wash a Carpet Rug
Did you know that the United States currently employs 29,006 carpet cleaners?
Whether your home is reeling from rolling up the rug to let in your dog’s dirty paws, or your kids are spilling soda all over your brand new carpet, a clean rug is essential for a clean house.
Carpets are a go-to flooring choice because they provide a soft and comfy environment for family living. This comes with a little extra cleaning duty that makes it hard to keep up with.
But you don’t have to give up on having a soft carpet under your feet! Here’s how to wash a carpet rug.
How to Wash a Carpet Rug 101: Vacuum the Rug
Before you start to clean your rug, it’s important to vacuum it first to remove any dust or dirt that could be ground into the fibers when you wash it. Vacuum in the direction of the rug’s nap and make sure to go over each area several times. Once you’ve vacuumed, you’re ready to start washing your rug.
Mix a Solution of Mild Soap and Water
When it comes to cleaning your carpet rug, it’s best to start with a mix of mild soap and water. This will help break down any dirt or grime that may be stuck to the fibers of your rug.
To create the perfect mixture to wash a carpet rug, you will need the following ingredients: 1 cup of white vinegar, 1 cup of baking soda, 1 gallon of hot water, and 1/2 cup of mild dish soap. Simply mix all of the ingredients together in a large bucket. Allow the mixture to soak into the carpet or rug for at least 15 minutes, then begin scrubbing the area.
Scrub the Rug Gently
In scrubbing a carpet rug, you want to be gentle so you won’t damage the fibers of the rug.
To do this, you can use a brush with soft bristles. Alternatively, you can use a vacuum with a brush attachment.
Rinse the Rug With Clean Water
Using a hose or bucket, slowly pour clean water over the entire surface of the rug. Allow the water to sit for a few minutes before draining it off. Repeat this process as needed until the rug is clean.
Use a Wet/Dry Vacuum to Remove Any Remaining Water
You’ll want to use a wet/dry vacuum to remove as much water as possible. First, make sure that the vacuum is set to “wet” mode. Then, starting at the edge of the carpet or rug, slowly move the vacuum back and forth across the surface. Repeat this process until you’ve vacuumed the entire surface.
If you don’t have time to do all this, you can always hire a carpet cleaner to do the job for you. To help you search for the best cleaner, check Arizonacarpetandtilesteamers.com. They use powerful steam cleaners to take care of even the most stubborn dirt and stains.
The Right Way to Clean Your Carpet Rugs
Carpet rugs can be tricky to wash, but with these easy steps on how to wash a carpet rug, you’ll have your rug looking and smelling fresh in no time. All you need is a vacuum, a carpet cleaner, and a little bit of elbow grease. With a little care and regular cleaning, your carpet rug will last for years to come.
Did you find this guide helpful? If so, check out our other home improvement articles.
